|
Key words of this product: fingerprint door locks, confidential room, money chamber, guns cabinet Functions and Targets
* Stability and reliability: Adopt Industrial DSP chips of U.S. Texas instruments with low frequency and anti-interference
* Optical fingerprint acquisition: substantial and durable character, advanced algorithm, easy identification and outside light prevention with highly bright background.
* Simple and convenient operation: Adopt Findo control system with ergonomic grading and easy to remember.
* Changeable multiple fingerprints: 30 fingerprints for single grade, up to 200 fingerprints for extended three grades.
* Double-fingerprint mode: directly switch into double-fingerprint unlock mode outsides (confidential room, money chamber and guns cabinet)
* Triple model unlock: fingerprint (three grades), password (double grades), mechanical key.
* Double-key and double-lamp: Unique double-key is set in front to implement functions of adding, deleting, unlocking, and setting password.
* Three-state setting: normal lock, entry lock and limited unlocking (only operated by administrator), and applicable for multiple-purposes.
* Various deletion methods: Delete fingerprint by the way of grading, appointed fingerprint, final registered fingerprint and appointed position.
* Quantity and position inquiry: Through importing by double keys, red and green lights shall flicker to display the quantity and position of stored fingerprints.
* Remote control to unlock: Select installation of unlock button or remote control device to manage unlocking from a far distance.
* Alerting: During lack of electric quantity and door not closed well, sound and light alerting shall be sent (depend on different products).
* Energy saving: 4 pieces of AA alkaline battery experiment for over ten thousand times (more than one year).
technic parameter
| Working voltage DC |
4.6 ~ 7.5V |
| Fingerprint capacity |
200 (30+90+80) |
| Dynamic power consumption |
70 ~ 150mA |
| Static power consumption |
< 15uA |
| Resolution |
500DPI |
| Accepted angle |
+- 45o |
| False rejection rate |
< 1% |
| False acceptance rate |
< 0.0001% |
| Verifying time |
< 1s |
| Working temperature |
-15ºC ~ 65ºC |
| Working humidity |
20% ~ 80%RH |
|
5310 model backpacking door lock
 * Induced by fingerprint, lock tongue shall be retracted, and then the door can be opened.
* After door opening, lock tongue shall not automatically stretch out, but three seconds later after door closing, it shall do.
* If it is not open within ten seconds, lock tongue shall automatically stretch out for locking.
* Press unlocking button inside door, and then lock tongue shall be retracted, then the door can be opened.
* The door can¡¯t be opened by fingerprint after reverse-locking is set up by switch.
* Rotating handle inside door is used for emergent unlock.
* Alarming signal will last for 60 seconds if abnormal unlocking is occurring.
* Without emergency key design, the user has to emergently unlock it from inside.
|
|
5320 model anti-theft door lock
 * Equiped with lock body electric controled by mute motor.
* After fingerprint verified, lock tongue shall be retracted, and then door can be opened within three seconds.
* If door is not open within three seconds, lock tongue shall automatically stretch out for locking.
* After door opening, lock tongue shall not automatically stretch out, but one second later after door closing, it shall automatically lock door.
* After turning on the button for opening door and before door closing, press key + for automatically locking.
* Directly turn the rotating handle for unlocking inside door.
* It can be divided into two categories of 6V battery and 12V electric power.
* Emergent key component is optional.
|
|
5300 model multi-purpose small entrance guard
 * Green metal shell, designed with handle and double-key operation
* Can be connected with DC12V, and locking or unlocking controled by relay after fingerprint verified.
* Make 12v simple electric controled lock unlock.
* Short circuit signal can be sent for 0.3 seconds to drive controller circuit.
* Form into various applications by hanging on the wall or fixed on the cabinet door.
* Four application modes can be switched.
| SW1 |
SW2 |
Working Mode |
| off |
off |
Positively electrifying time is 0.3seconds, three seconds later get through electricity in opposite direction for 0.3seconds. |
| on |
off |
Positively electrifying time is 3seconds to pull in relay or electromagnet. |
| off |
on |
Positively and reversely get through electricity. Use travel switch to control for stopping and the interval is three seconds. |
| on |
on |
Positively get through electricity for 0.3seconds to pull in relay. (driven controller) |
|
|
fingerprint door locks (TG5300)